Skip to main content
  • Oral presentation
  • Open access
  • Published:

Preliminary marker-based validation of a novel biplane fluoroscopy system

Background

The use of biplane fluoroscopy to track bones in the foot is challenging, due to distortion, overlap and image artefact inherent in fluoroscopy systems and high speed photography. The accuracy and precision of these systems have been reported [1–4] and are presented here for our biplane fluoroscopy system.

Materials and methods

Biplane Fluoroscopy System: The system consists of two Philips BV Pulsera C-arms set in custom frames around a raised floor with a radiolucent imaging area. X-ray images are captured with high speed (1000fps) cameras. Validation Object: 1.6mm tantalum beads were placed in a machined block (wand) then measured to 7 microns with a Coordinate Measuring Machine to determine their centroid location. The wand was translated and rotated via a 1 micron precision stepper-motor for static validation, as well as manually swept through the field of view at ~0.5m/s for dynamic. Static Accuracy and Precision: accuracy was defined as the RMS error between the translation of the stepper-motor and the measured movement of the beads; precision is defined as the standard deviation of the bead locations. For rotation, accuracy was defined as the RMS error between the applied and measured rotation of the wand. Dynamic Accuracy and Precision: accuracy was defined as the RMS error between the known and measured inter-bead distance; precision was the standard deviation of the inter-bead distance. 3D location processing was accomplished using custom software written in MatLab to derive the 3D location of objects from two, time-synchronized, 2D fluoroscopy images of known spatial relationship. This software also compensates for the image distortion (Figure 1).

Figure 1
figure 1

Distortion plate before (left) and after (right) correction for pin-hole distortion and magnetic distortion.

Results

Translation: the overall RMS error was 0.066 mm, with a precision of ± 0.016 mm. Rotation: the RMS error was 0.125°. Dynamic motion: the overall RMS error was 0.126 mm, with a precision of ± 0.122 mm.

Conclusions

The accuracies and precision in the results are comparable to similar such systems in development to investigate other joints of the body [1–4]. We are currently developing and validating a marker-less technique for tracking the bones of the foot.

References

  1. Brainerd EL, et al: X-ray reconstruction of moving morphology (XROMM): precision, accuracy and applications in comparative biomechanics research. J Exp Zool A Ecol Genet Physiol. 2010, 313: 262-279.

    PubMed  Google Scholar 

  2. Miranda D, et al: Accuracy and precision of 3-D skeletal motion capture technology. 56th ORS. 2010, Paper no. 334

    Google Scholar 

  3. Li G, et al: Validation of a non-invasive fluoroscopic imaging technique for the measurement of dynamic knee joint motion. J Biomech. 2008, 41: 1616-1622. 10.1016/j.jbiomech.2008.01.034.

    Article  PubMed  Google Scholar 

  4. Kaptein BL, et al: A comparison of calibration methods for stereo fluoroscopic imaging systems. J Biomech. 2011, 44: 2511-2515. 10.1016/j.jbiomech.2011.07.001.

    Article  PubMed  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to William R Ledoux.

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Iaquinto, J.M., Tsai, R., Fassbind, M. et al. Preliminary marker-based validation of a novel biplane fluoroscopy system. J Foot Ankle Res 5 (Suppl 1), O36 (2012). https://doi.org/10.1186/1757-1146-5-S1-O36

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/1757-1146-5-S1-O36

Keywords