Skip to main content

Volume 5 Supplement 1

3rd Congress of the International Foot and Ankle Biomechanics Community

  • Oral presentation
  • Open access
  • Published:

Effects of unstable footwear on joint reactions and muscle forces: an inverse dynamics study

Background

Unstable shoe designs should support the muscle activity and promise the treatment of leg, back and foot problems. According to manufacturers, they should activate additional muscles and reduce joint reaction forces. Goal of this study is to investigate the effect of an unstable shoe design to gait patterns of healthy volunteers and by the means of inverse dynamic multi-body simulation.

Materials and methods

Seven subjects (age: 46.5±7.6 years, weight: 91.7±11.1kg) familiar with unstable shoes performed five trials of level walking in three testing conditions (barefoot, conventional and unstable shoe). As an unstable shoe the Anti-Step (Chung-Shi) was chosen. Kinematic and kinetic data was acquired with a motion capturing system (Vicon) and two forceplates (AMTI). The inverse dynamics model of the lower extremity consists of nine rigid bodies which are connected with idealized joints and a set of all relevant muscles.

Results

Comparing walking speed while walking barefoot or with stable and unstable shoe designs, the volunteers walked significantly slower in the barefoot case (p<.003). Preliminary multi body-simulation data was analysed for four out of seven volunteers. Peak joint reaction forces were reduced by 29% when comparing conventional with unstable shoes (Figure 2). Muscle activation changes in magnitude for all groups (Figure 1). The timing remains similar, except the everter group activating only with the unstable shoe during stance phase.

Figure 1
figure 1

Muscle activation of the ankle muscle groups around the ankle for one subject. Lines representing results for barefoot (red), conventional shoe design (green) and unstable shoe design (blue).

Figure 2
figure 2

Joint reaction forces in the ankle for one subject. Lines representing results for barefoot (red), conventional shoe design (green) and unstable shoe design (blue).

Conclusions

The simulation reveals muscle activation patterns that indicate instability along the inversion/eversion axis of the ankle, which is also found in the literature [1]. The additional activation of the everter group during stance phase possibly exercises this group and could lead to an effect on the arch of the foot.

References

  1. Nigg B, Hintzen S, Ferber R: Effect of an unstable shoe construction on lower extremity gait characteristics. Clin Biomech. 2006, 21: 82-88. 10.1016/j.clinbiomech.2005.08.013.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Michael Schwarze.

Rights and permissions

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Schwarze, M., Seehaus, F., Hurschler, C. et al. Effects of unstable footwear on joint reactions and muscle forces: an inverse dynamics study. J Foot Ankle Res 5 (Suppl 1), O7 (2012). https://doi.org/10.1186/1757-1146-5-S1-O7

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/1757-1146-5-S1-O7

Keywords